New Construction

If you're looking for a stump cutter that can maximize your crew's time on the jobsite and maximize efficiency, the Vermeer SC1052 stump cutter is your machine. Designed with the Vermeer cutting system (VCS), ...

The self-propelled SC292 stump cutter is equipped with a 26.5 hp (19.8 kW) [EFI Kohler engine](http://kohlerengines.com/efi/index.htm) providing full- sized power in a compact unit. Convenience and safety features inc...

The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intend...

Vermeer has expanded its stump cutter lineup offering increased options for the customer. Equipped with a 35-hp (26.1 kW) Vanguard engine, a hydraulic ground drive and a belt driven cutter head, the SC362 provides ope...

This SC382 Vermeer stump cutter is equipped with a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine. The optimized cutting wheel on the SC382 gives this machine aggressive cutting capabilities. Along with stand...

The Vermeer SC48TX stump cutter delivers high efficiency from engine to the stump grinding wheel through a 48-hp diesel engine with a direct drive system. This machine gives operators access to tight and challenging ...

The Vermeer SC552 stump cutter is designed to maneuver through tough jobsite conditions. A unique four-bar linkage allows the cutter wheel to move away from the machine as the boom drops down toward the stump, reduci...

The SC70TX can fit into tight spaces in a residential area. The track system is designed to decrease ground disturbance. The SC70TX is equipped with safety features such as the patented capacitance-sensing operator pr...

Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (15...

The SC852 stump cutter can glide through a standard gate and still deliver 74 hp (55 kW) of stump-grinding power with a Deutz TD2.9L Tier 4 Final engine. The Yellow Jacket™ Cutter System helps extend pocket and...

Scrap Grapple Bucket (Skidsteer)   Two independent grapples  1/4" material, 3/8" end plates  3/4 X 6 bevelled cutting edge  Ideal for awkward abrasive loads  31" overall ...

        Side Discharge Sand Bucket   Minimum 12 GPM required  Made of same material as sawdust bucket  Baffle brace and beater to improve flow and keep weight off belt  3...

        Side Discharge Sawdust Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Beater to prevent bridging  Discharge from either side of machine&...

        Side Discharge Straw/Lime Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Agitator prevents material bridging  Secondary metering drum regulat...

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

Push-pull design for grading in forward or reverse  Pneumatic swivel wheels with tapered roller bearings on king pins, on oscillating front axle  Tapered roller bearings on axle oscillation pivot  Rem...

The SPX25 is operated with a full-function remote control that provides greater maneuverability in congested and tight jobsites. A 25 hp (18.6 kW) Kohler gas engine provides ample power for both plowing small pipes an...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

The ST2000 makes transportation of slurry convenient and efficient, cutting excess time on the road traveling to specialized dumps. This portable machine offers contractors an option to set up in a centralized locatio...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-&frac1...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½"...

        Standard Front End Loader Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top...

        Standard Front End Loader Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders         ...

       Standard Skidsteer Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip&nbs...

        Standard Skidsteer Bucket - Long Lip (Heavy Duty)   1/4" material, 1/4" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  40" deep, 24...

      Standard Skidsteer Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell hi...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkwar...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awk...

Ideal tool for finishing grade around residential and commercial properties.  The V-bottom design ensures a consistent angle as swale is cut.  Available for both standard and compact skid loaders.  3/...

For pipeline projects requiring high horsepower and deep digging depths, Vermeer offers the T1055 Commander® 3 trencher. This trencher houses a powerful Caterpillar C13 ACERT Tier 3 or Caterpillar C13 ACERT Tier 4...

The T1055III Terrain Leveler® SEM is equipped with a Caterpillar C13 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site. Pair this wit...

The T1155 Commander® 3 trencher is the perfect trenching machine to penetrate rock. It's the ideal combination of heavy-duty construction, 540 hp (403 kW) from the turbocharged Caterpillar C15 ACERT Tier 3 or ...

The 540 hp (403 kW) from the turbocharged Caterpillar C15 ACERT Tier 3 or Tier 4 Final engine and sophisticated electronics makes it the best surface leveler in its class.       ...

Efficiently conduct surface mining extraction, remove ground surface, or create a smooth, level area for site preparation, road construction or soil remediation with the T1255III Terrain Leveler® SEM chain drive a...

The T1255III Terrain Leveler® SEM direct drive offers a single-sided attachment that packs the power you need to take on tough civil and surface mining projects. The unique single-sided attachment allows the opera...